Well Inspection & Water Testing in Dallas, TX
Protect your family's water supply with professional well inspections and water quality testing.
Call Now (469) 778-4215Free Estimates • Licensed & Insured
Well Inspection & Water Testing in Dallas
A well inspection is a full checkup of your entire water system — from the cap on top of the ground all the way down to the pump hundreds of feet below. At Well Drilling Dallas, we look at every part to make sure you're getting clean, safe water at the right flow and pressure.
Water testing goes with every inspection. Your well can look fine from the outside while the water inside has bacteria, minerals, or contaminants you can't see. The EPA says private well owners should test their water at least once a year — and more often if the taste, smell, or color changes.
Annual checkup, real estate certification, or something just seems off — Well Drilling Dallas provides thorough inspections and certified lab water testing for Dallas homeowners.
When Do You Need a Well Inspection?
Annual maintenance: The National Ground Water Association says inspect once a year. Annual checkups catch small problems — a cracked well cap, a slow drop in flow rate — before they turn into big expensive ones.
Buying or selling a home: Most lenders and buyers in the Dallas area require a well inspection and water test before closing. We provide certified reports that satisfy real estate requirements in TX.
Changes in water quality: Water that suddenly tastes different, smells like rotten eggs, looks cloudy, or leaves stains on your fixtures is telling you something changed. An inspection and water test will find the cause.
After flooding or severe weather: Heavy rain, flooding, or nearby construction can push surface water into your well. A post-storm inspection and bacteria test confirms your water is still safe — especially important after events like the February 2021 North Texas winter storm.
New property with an existing well: Moved onto land with a well someone else drilled? An inspection tells you what shape it's in and what — if anything — needs fixing or upgrading.
What We Inspect
Well Cap & Seal
We check that the cap is tight, the sanitary seal is solid, and nothing — insects, rodents, surface water — can get down into your well casing.
Well Casing
We look at the visible casing for cracks, rust, or damage. A cracked casing is an open door for surface water and contaminants to get into your supply.
Flow Rate & Yield
We measure output in gallons per minute to confirm your well can meet your home's daily demand. A dropping flow rate can point to a pump issue or a dropping water table.
Pump & Pressure System
We run your pump through its paces, check the pressure tank air charge, verify switch settings, and inspect all electrical connections. You find out now if something is about to fail — not after you lose water.
Water Level
We measure the water level at rest and again while pumping. This tells us if your aquifer is healthy and whether the pump is sitting at the right depth in the well.
Surrounding Area
We walk the area around your wellhead looking for contamination risks — nearby septic systems, chemical storage, animal pens, or water runoff paths that could affect what comes out of your tap.
Water Testing Services
We collect samples from your well and send them to a certified lab. Results usually come back in 5 to 10 business days. Here's what we test for:
Bacteria Testing
We test for total coliform bacteria and E. coli — the two markers that tell you if your well has been contaminated in a way that can make people sick. This is the most important test you can run, and it should happen every year. If bacteria shows up, we can shock chlorinate your well to eliminate the contamination.
Mineral & Hardness Analysis
DFW well water is almost always hard. That's because it flows through limestone aquifers that are naturally high in calcium and magnesium. Hard water — water with high mineral content — leaves white scale in your pipes, water heater, and dishwasher. It also shortens the life of those appliances over time. Our test tells you exactly how hard your water is so you can size a water softener if needed. We also check iron, manganese, and pH levels. High iron causes orange staining on sinks and fixtures.
Nitrate & Contaminant Screening
The rural counties around Dallas — Collin, Denton, Ellis, and Kaufman — have active farms and ranches where fertilizer runoff can carry nitrates into groundwater. Nitrates are especially dangerous for infants and young children. If you're on a rural property with a well, annual nitrate testing is important. We also screen for arsenic, lead, and other contaminants based on the local geology and known risks in the Dallas area.
Real Estate Water Testing
Buying or selling a home with a well in Dallas? We handle the water quality testing lenders and buyers require at closing. Our certified reports are accepted by lenders and real estate inspectors across TX.
Well Inspection Cost in Dallas, TX
Inspection cost in the Dallas area depends on what we're doing. A visual inspection costs less than a full checkup with lab water analysis. Real estate certifications involve more detailed reporting for lenders, so they run a bit higher. We give you clear pricing before we schedule anything.
Call (469) 778-4215 for exact pricing and to schedule your inspection.
Well Inspection Service Areas
We inspect wells and test water across Dallas, TX and the surrounding areas including Fort Worth, Plano, Arlington, Garland, Irving, McKinney, Frisco, Grand Prairie, Allen, Richardson, Carrollton, Denton, and other nearby communities. Annual checkup or real estate certification — call us and we'll get it scheduled.
Frequently Asked Questions
How often should I have my well inspected?
At least once a year. That catches problems early and keeps your water safe. Also get an inspection after flooding, nearby construction, or any change in how your water looks, tastes, or smells.
How often should I test my well water?
The EPA says test for bacteria and nitrates at least once a year. Test more often if you have infants at home, your well has had contamination before, or you're on rural land near farms or ranches — which is common in Collin, Denton, Ellis, and Kaufman counties.
What happens if bacteria is found in my well water?
Don't panic — it's fixable. We shock chlorinate your well to kill the bacteria, then retest to confirm it's gone. If contamination keeps coming back, we dig into the cause and recommend a permanent fix — UV disinfection, a new seal, or well repairs.
Do I need a well inspection to sell my house?
In most cases, yes. Mortgage lenders require a well inspection and water test for homes with private wells. Even when it's not required, buyers ask for one. Having a current inspection report ready speeds up the sale and builds buyer confidence.
Why does my well water smell like rotten eggs?
That smell is hydrogen sulfide gas — a natural byproduct found in some well water. At low levels it's usually not harmful, but it's unpleasant and can be a sign of other issues. A water test tells us exactly what's in there. Treatment options include aeration, carbon filters, or chemical injection depending on how bad it is.
Schedule Your Well Inspection in Dallas
Know exactly what's in your water. Call today to book your inspection.
Call Now (469) 778-4215