Well Pump Repair in Dallas, TX
Fast, reliable well pump repair and installation. We restore your water supply and keep it running.
Call Now (469) 778-4215Free Estimates • Licensed & Insured
Well Pump Repair & Installation in Dallas
Your well pump is the heart of your water system. When it stops, so does everything else — no showers, no laundry, no flushing toilets. At Well Drilling Dallas, we get Dallas homeowners their water back fast.
Pump failures in North Texas often spike in summer. Irrigation systems, pool fills, and heavy household use push pumps hard during the heat. They also fail during hard freezes — like the February 2021 winter storm — when pipes and pressure tanks crack under the cold. Whether it's 100 degrees or an ice storm, we prioritize emergency calls so you're not without water.
We service all types of well pumps — submersible, jet, and booster. Simple repair or full replacement, our licensed technicians have the tools and experience to fix it right.
We also install new pump systems for newly drilled wells and upgrade aging systems to modern constant-pressure technology.
Signs Your Well Pump Needs Repair
No Water at All
Turn on a faucet and nothing comes out. The pump may have died, the pressure switch may be stuck, or there's an electrical problem. This is an emergency — call us now.
Low or Fluctuating Pressure
Pressure that drops when you run the dishwasher or shower often points to a failing pressure tank, a worn pump, or a waterlogged tank — one that's lost its air cushion.
Pump Runs Continuously
A pump that never shuts off will burn out fast. It's working around the clock to keep up with a leak, a bad pressure switch, or a failed check valve. The longer it runs nonstop, the shorter its life gets.
Sputtering or Air in Lines
Air spitting from your faucets means the pump is pulling air instead of water. That can mean the water level dropped in your well, there's a crack in the drop pipe, or the pump is starting to fail.
Dirty or Sandy Water
Grit or cloudiness in your water usually means the pump slipped too low in the well, the well screen is damaged, or the well itself needs work. Don't ignore it — sediment wears out your pump fast.
High Electric Bills
A pump that short-cycles — kicks on and off constantly — uses a lot more electricity. A properly sized modern pump can cut that energy waste and lower your bill.
Our Well Pump Services
Submersible Pump Repair & Replacement
Submersible pumps sit deep inside your well — often 100 to 400 feet down in North Texas — and are the most common type in Texas. When they fail, we pull the pump, find out what went wrong, and repair or replace it. Most last 8 to 15 years. Hard DFW well water with high mineral content can shorten that lifespan.
Pressure Tank Replacement
Your pressure tank keeps your water pressure steady and stops the pump from kicking on every time you turn a faucet. When the tank fails or gets waterlogged, pressure bounces around and your pump wears out early. We install the right-sized tank for your home's demand — and your pump lasts longer because of it.
Constant Pressure Systems
Upgrade to a variable frequency drive (VFD) constant pressure system. A VFD adjusts your pump speed automatically so pressure stays steady no matter how many faucets, showers, or appliances are running at once. You get city-water-like pressure from your well — popular with Dallas homeowners who want that consistent feel.
Pressure Switch & Controls
We find and replace faulty pressure switches, control boxes, and wiring. These electrical parts fail more often than people think — and they cost much less to fix than pulling and replacing the pump itself. We always check the controls first.
Well Pump Repair Cost in Dallas
Repair costs in the Dallas area depend on what's wrong. A pressure switch or wiring fix costs much less than pulling a submersible pump from 200 feet down. We find the problem first — then give you a written number before we touch anything.
Nothing starts until you approve the cost. Call (469) 778-4215 for a free evaluation.
Well Pump Service Areas
We repair and install well pumps across Dallas, TX and the surrounding areas including Fort Worth, Plano, Arlington, Garland, Irving, McKinney, Frisco, Grand Prairie, Allen, Richardson, Carrollton, Denton, and other nearby communities. If your pump is failing — or you just lost water — call us now. We prioritize emergency calls.
Frequently Asked Questions
How long do well pumps last?
Submersible well pumps typically last 8 to 15 years. Water quality, usage, and correct sizing all affect that number. In North Texas, the hard well water — high in calcium and minerals from the limestone aquifer — can wear out pump parts faster than in softer water regions.
Can you repair my pump the same day?
We prioritize emergency calls — you can't go without water, especially during a Texas heat wave or a hard freeze. Many repairs, including pressure switches, controls, and above-ground parts, can be done the same day. Pulling a submersible pump takes more time but we typically get it done within 24 to 48 hours.
Should I repair or replace my well pump?
If your pump is under 8 years old and the problem is electrical or mechanical, repair is usually the right call. If it's 10 or more years old, has failed before, or the water quality has been rough on it, a new pump gives you better long-term value. We'll give you an honest recommendation after we diagnose the problem.
What is a constant pressure system?
A constant pressure system uses a variable frequency drive — a VFD — to speed up or slow down your pump in real time. Pressure stays steady no matter how many faucets, showers, or appliances run at once. No more pressure drops when someone flushes the toilet while you shower.
Well Pump Problems in Dallas?
Your pump comes back on fast. Call now — we answer emergency calls.
Call Now (469) 778-4215